Specialist lead roofing across Royal Wootton Bassett — valleys, chimney flashings, parapet gutters and flat lead. Correct code weights to BS EN 12588. Free no-obligation quotes.
All lead roofing work across Royal Wootton Bassett and surrounding Wiltshire.
Step, soaker and apron in code 4. Correctly dressed, not sealant over old flashing.
Get a quote →Lead on porches, bay tops and dormers. Correct movement joints throughout.
Get a quote →Targeted repairs on minor failures. Honest assessment before recommending replacement.
Get a quote →Lead cheeks, soakers and crown flashings. Incorrect dormer leadwork is the most frequent loft conversion leak.
Get a quote →Elevated chalk ridge position creates more UV exposure and wind than the Avon Valley — south-facing roof slopes show advanced nail sickness sooner than equivalent properties in sheltered locations. For lead roofing work in Royal Wootton Bassett, this means specification choices that reflect the actual conditions rather than generic Wiltshire averages.
Mix of Victorian town centre and 1990s–2000s development estates, each with different maintenance profiles. We are 8 miles northeast from Royal Wootton Bassett — 15 minutes — with no travel surcharge and same local knowledge that applies to every property type in this area.
Free quotes. No call-out fees. 15 minutes from Chippenham.
Lead roofing work in Royal Wootton Bassett covers valleys, chimney flashings, parapet gutters and flat lead on porches and dormers. The Victorian town centre and 1990s–2000s estates properties generate the majority of leadwork calls. Lead valley and flashing failures are typically misdiagnosed — the leak often appears at the ceiling some distance from the source, and the root failure has been ongoing for multiple wet seasons before it becomes visible.
We specify all leadwork to BS EN 12588 with correct code weights — code 3 for soakers, code 4 for general valley and flashing, code 5 for flat roofs and parapet gutters. Correct thermal movement allowance is built into every installation. Over-tacking lead against thermal movement is the most common installation error and causes cracking within 10–20 years regardless of lead quality.
"Chimney lead reflashed after years of sealant patches. Replaced properly in code 4. No leaks through two winters. Should have been done this way originally."
"Lead valley reline — new code 4 lead correctly dressed. The previous patch lasted one winter. This has lasted three."
"Parapet gutter reline in code 5 lead. Correct specification, conservation area compliant. Excellent work."
Chimney reflash: £350–£700. Valley reline: £80–£150 per metre. Parapet gutter: £120–£200 per metre. Flat lead: £150–£250 per m². Free written quote — call 01249 247 076.
Code 3 for soakers, code 4 for valleys and flashings, code 5 for flat roofs and parapet gutters. Using the wrong code causes premature failure.
Code 4 lead correctly installed should last 50–80 years. Incorrect fixing or inadequate thermal movement allowance reduces this to 10–20 years.
Royal Wootton Bassett is 8 miles northeast from Chippenham — 15 minutes. No travel surcharge.
Small splits or pinhole failures can sometimes be repaired. Where a flashing is 20+ years old with multiple failures, replacement is almost always better value. We assess honestly.
Thermal cycling causes lead to work against its fixings over decades. Correct installation allows for movement — this is the fundamental difference between a lasting job and a failing one.
Yes — patination oil is applied on completion to slow weathering and prevent run-off staining on stonework and render below.
No call-out fees. No obligation. Local roofer covering all of Wiltshire.
01249 247 076