Specialist chimney repairs in Corsham — repointing, lead reflashing, flaunching and pot replacement. Lime mortar on historic stock. Free no-obligation quotes, no call-out fees.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
📞 Call Now: 01249 247 076In short: Chimney Repairs in Corsham: Chimney repairs run £150–£800+ depending on scope. We cover Corsham and the surrounding SN13 area with free quotes, no call-out fee, and a 10-year workmanship guarantee. Most chimney leaks come from failed flashing, cracked flaunching or eroded pointing.
All chimney repairs work across Corsham and surrounding Wiltshire — same local team, same standards, same guarantee as our Chippenham base.
Mortar raked out and replaced in correct specification — NHL lime on historic masonry, flexible mortar on modern brick. Four sides, full height. Scaffold included.
Get a quote →Step flashings, soakers, apron and back gutter replacement in code 4 or 5 lead. Correctly cut and dressed — not sealant over existing flashing.
Get a quote →Cracked flaunching (the mortar bed securing chimney pots) replaced in appropriate mortar. Pots inspected and replaced where broken.
Get a quote →Chimney pot replacement, cowl fitting and anti-bird guards. We match original pot profiles on period properties where appropriate.
Get a quote →Full chimney stack removal to roof level where the stack is redundant, structurally compromised, or creating maintenance problems. Slate or tile repair to close the opening.
Get a quote →Sudden flashing failure, structural stack movement, pot displacement. Emergency assessment same day — temporary make-safe applied, permanent repair scheduled.
Get a quote →Corsham's conservation area and Bath stone properties retain moisture differently to modern brick — damp penetration from failed mortar is faster on porous limestone. For chimney repairs work in Corsham, this means specification choices that reflect the actual conditions rather than generic Wiltshire averages.
Victorian and Edwardian terraces on the High Street and Lacock Road dominate the repair profile. We are 3 miles west from Corsham — 8 minutes — with no travel surcharge and same local knowledge that applies to every property type in this area.
Free quotes. No call-out fees. 8 minutes from Chippenham.
Most chimney leaks come from failed flashing, cracked flaunching or eroded pointing in Corsham. Corsham is a Bath-stone conservation town — honey-coloured ashlar terraces, stone-slate and clay roofs, and the historic weavers' cottages around the High Street and Pickwick. On this kind of stock, the common problems are failed lime pointing on Bath-stone stacks, slipped stone slates, and conservation-grade repairs on the listed cottages — and knowing which you are dealing with is the difference between a lasting fix and money wasted.
Chimney repairs in Corsham's conservation area require lime mortar as standard — Bath stone and the local brick used on Victorian properties require NHL hydraulic lime, not cement. Cement pointing causes irreversible spalling on soft historic masonry and will be flagged by the Conservation Officer on any subsequent inspection. We carry lime mortar as standard stock for Corsham chimney visits and never use cement on historic masonry.
Lead flashing failures are the most common chimney repair call from Corsham — step flashings, soakers and apron flashings on clay plain tile roofs that have reached or exceeded their service life. We replace in code 4 lead as standard, code 5 on wider stacks and parapet gutters. All chimney work includes a visual inspection of the stack, pot and flaunching during the visit.
We assess the stack, pots, flaunching and flashing from scaffold or tower — not from the ground.
We identify which of the three common failure points is letting water in — often more than one.
A fixed price with repointing, flaunching, flashing and cowls itemised separately.
Failed elements renewed — lime mortar on period stacks, flexible mortar on post-war.
The stack is left weathertight, with patination oil on any new lead, and guaranteed.
| Job | Typical duration |
|---|---|
| Flashing renewal | half to full day |
| New flaunching | half day |
| Full stack repoint | 1–2 days |
| Cowl supply & fit | 1–2 hours |
| Chimney rebuild (above roofline) | 2–4 days |
Lime mortar on period stacks needs frost-free conditions to cure, so deep-winter repointing is weather-scheduled.
Corsham's stone-built town-centre terraces have no rear access and sit in a conservation area, so materials pass over the front and matching stone slate or natural materials are often required. Pavement scaffold and skip permits in Corsham go through Wiltshire Council; on tight streets like Pickwick Road, the High Street, Priory Street we allow extra time for setup and access.
Chimney repairs run £150–£800+ depending on scope. Corsham pricing tracks Chippenham, adjusted for access on Corsham's stock.
| Job | Typical range | Notes |
|---|---|---|
| Flashing renewal | £350–£700 | Code 4 lead |
| New flaunching | £200–£400 | Secures the pots |
| Full stack repoint | £150–£800+ | Scope-dependent |
| Cowl supply & fit | £80–£200 | Anti-downdraught or capping |
| Chimney capping (redundant) | £250–£600 | Ventilated seal |
| Repoint + flaunch + cowl | £500–£800 | Combined |
No deposit on jobs under £500. VAT included. Payment on completion. On larger stack rebuilds, no payment before materials are on site.
Covering SN13 and surrounding postcodes.
Workmanship carries our 10-year guarantee; new lead and pots carry manufacturer warranties, and lime repointing on period stacks is done to conservation standard.
Scaffold for a day or two and some noise during raking-out; we sheet the roof below and clear all debris and old mortar. You do not need to stay home for external work.
Chimney repairs run year-round except hard frost for lime mortar; we make safe and reschedule if the weather won't let mortar cure. Corsham sits on the higher ground west of Chippenham, exposed to the prevailing south-westerlies coming off the Bath hills.
"Chimney repointing on Victorian terrace — NHL lime throughout, lime sand colour-matched to original. Conservation Officer confirmed the work met requirements at subsequent inspection."
"Lead valley and apron flashing replaced on a clay plain tile property. Code 4 lead, correctly dressed. Dry through two winters — the previous patch job had failed within a year."
"Flaunching cracked on both chimney pots — water getting into the stack. New flaunching in appropriate mortar, pots inspected and sound. Job done in half a day."
Always on conservation area and historic properties. NHL 2.5 or 3.5 hydraulic lime appropriate to the masonry — never cement on Bath stone, Cotswold limestone or original soft brick.
Full chimney repoint (four sides): £300–£600. Lead reflash: £350–£700. Flaunching replacement: £200–£400. All include scaffold where required. Free written quote — call 01249 247 076.
Open mortar joints, efflorescence (white salt staining), damp patches on the chimney breast inside, or ridge tiles slipping at the chimney junction are all indicators. We offer free chimney surveys — many issues aren't visible from ground level.
Like-for-like repointing in appropriate mortar doesn't require consent. Changes to chimney height, stack removal, or any alteration to a listed building requires listed building consent. We advise during the free survey.
Yes — pot replacement, flaunching renewal and cowl fitting are all part of our chimney service. We match original pot profiles on period properties where appropriate.
We inspect the accessible stack and pot externally and check the flue opening at the top. Internal flue inspection requires a chimney camera — we can arrange this if suspected blockage or flue damage is a concern.
Corsham is 3 miles — 8 minutes. Emergency chimney response typically within 2 hours, 24/7. Call 01249 247 076.
No call-out fees. No obligation. Local roofer covering all of Wiltshire.
01249 247 076Last updated: August 2026