Specialist chimney repairs in Bradford-on-Avon — repointing, lead reflashing, flaunching and pot replacement. Lime mortar on historic stock. Free no-obligation quotes, no call-out fees.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
📞 Call Now: 01249 247 076In short: Chimney Repairs in Bradford-on-Avon: Chimney repairs run £150–£800+ depending on scope. We cover Bradford-on-Avon and the surrounding BA15 area with free quotes, no call-out fee, and a 10-year workmanship guarantee. Most chimney leaks come from failed flashing, cracked flaunching or eroded pointing.
All chimney repairs work across Bradford-on-Avon and surrounding Wiltshire — same local team, same standards, same guarantee as our Chippenham base.
Mortar raked out and replaced in correct specification — NHL lime on historic masonry, flexible mortar on modern brick. Four sides, full height. Scaffold included.
Get a quote →Step flashings, soakers, apron and back gutter replacement in code 4 or 5 lead. Correctly cut and dressed — not sealant over existing flashing.
Get a quote →Cracked flaunching (the mortar bed securing chimney pots) replaced in appropriate mortar. Pots inspected and replaced where broken.
Get a quote →Chimney pot replacement, cowl fitting and anti-bird guards. We match original pot profiles on period properties where appropriate.
Get a quote →Full chimney stack removal to roof level where the stack is redundant, structurally compromised, or creating maintenance problems. Slate or tile repair to close the opening.
Get a quote →Sudden flashing failure, structural stack movement, pot displacement. Emergency assessment same day — temporary make-safe applied, permanent repair scheduled.
Get a quote →The Avon Valley's consistently high moisture makes this the most demanding environment in our coverage for lead and felt longevity — we specify code 5 lead on exposed stacks as standard here. For chimney repairs work in Bradford On Avon, this means specification choices that reflect the actual conditions rather than generic Wiltshire averages.
Extensive Bath stone conservation area with terraced hillsides — one of the highest concentrations of listed buildings in Wiltshire. We are 10 miles south from Bradford On Avon — 20 minutes — with no travel surcharge and same local knowledge that applies to every property type in this area.
Free quotes. No call-out fees. 20 minutes from Chippenham.
Most chimney leaks come from failed flashing, cracked flaunching or eroded pointing in Bradford-on-Avon. Bradford-on-Avon is a steep Bath-stone town tumbling down to the river — terraced weavers' cottages, stone-slate and clay roofs, and one of Wiltshire's densest listed-building cores. On this kind of stock, the common problems are conservation-grade stone-slate work, lime repointing on stone stacks, and moss on the shaded riverside terraces — and knowing which you are dealing with is the difference between a lasting fix and money wasted.
Chimney repairs in Bradford-on-Avon require lime mortar throughout on all historic properties — Bath stone and Cotswold limestone require NHL hydraulic lime, and the town's density of listed buildings means conservation compliance is not optional. We carry lime mortar and correct code-weight lead for Bradford-on-Avon chimney visits as standard.
The Avon Valley's high moisture environment means lead corrosion is faster than on drier, higher-ground properties. Code 5 lead is recommended for Bradford-on-Avon chimney flashings on exposed and valley-facing stacks. All chimney work includes full stack inspection and a written condition report.
We assess the stack, pots, flaunching and flashing from scaffold or tower — not from the ground.
We identify which of the three common failure points is letting water in — often more than one.
A fixed price with repointing, flaunching, flashing and cowls itemised separately.
Failed elements renewed — lime mortar on period stacks, flexible mortar on post-war.
The stack is left weathertight, with patination oil on any new lead, and guaranteed.
| Job | Typical duration |
|---|---|
| Flashing renewal | half to full day |
| New flaunching | half day |
| Full stack repoint | 1–2 days |
| Cowl supply & fit | 1–2 hours |
| Chimney rebuild (above roofline) | 2–4 days |
Lime mortar on period stacks needs frost-free conditions to cure, so deep-winter repointing is weather-scheduled.
Bradford-on-Avon's steep, terraced stone streets have severe access constraints and a major conservation area demanding natural materials and lime mortar. Pavement scaffold and skip permits in Bradford-on-Avon go through Wiltshire Council; on tight streets like Silver Street, Market Street, Newtown we allow extra time for setup and access.
Chimney repairs run £150–£800+ depending on scope. Bradford-on-Avon pricing tracks Chippenham, adjusted for access on Bradford-on-Avon's stock.
| Job | Typical range | Notes |
|---|---|---|
| Flashing renewal | £350–£700 | Code 4 lead |
| New flaunching | £200–£400 | Secures the pots |
| Full stack repoint | £150–£800+ | Scope-dependent |
| Cowl supply & fit | £80–£200 | Anti-downdraught or capping |
| Chimney capping (redundant) | £250–£600 | Ventilated seal |
| Repoint + flaunch + cowl | £500–£800 | Combined |
No deposit on jobs under £500. VAT included. Payment on completion. On larger stack rebuilds, no payment before materials are on site.
Covering BA15 and surrounding postcodes.
Workmanship carries our 10-year guarantee; new lead and pots carry manufacturer warranties, and lime repointing on period stacks is done to conservation standard.
Scaffold for a day or two and some noise during raking-out; we sheet the roof below and clear all debris and old mortar. You do not need to stay home for external work.
Chimney repairs run year-round except hard frost for lime mortar; we make safe and reschedule if the weather won't let mortar cure. Bradford-on-Avon's steep valley sides and riverside position combine shade, humidity and wind exposure on the upper slopes.
"Chimney repointing and lead reflash — done correctly with appropriate mortar, no shortcuts. Dry since. Would recommend without hesitation."
"Flaunching replaced on both chimney pots — cracked and letting water into the stack. New flaunching, pots inspected and sound. Half a day from scaffold."
"Ridge tiles displaced at the chimney junction after a storm. Emergency call answered fast, on-site within 2 hours. Tiles replaced and repointed same day."
Chimney repoint: £300–£600. Lead reflash: £350–£700. Flaunching replacement: £200–£400. All include scaffold. Free written quote — call 01249 247 076.
Bradford-on-Avon is 10 miles south — 20 minutes. No travel surcharge. Emergency response available 24/7.
Depends on the masonry. Victorian and historic brick requires NHL hydraulic lime. Modern post-war brick uses flexible polymer-modified mortar. We assess and specify correctly — wrong mortar causes more damage than no repointing.
Yes — all chimney repointing, reflashing and flaunching work requires scaffold for safe access and quality of work. Scaffold cost is always included in our chimney quotes.
Visible open mortar joints, white salt staining, internal damp at the chimney breast, or tiles slipping at the chimney junction are all indicators. We offer free chimney surveys — many issues aren't visible from ground level.
Yes — ventilated caps prevent water ingress while maintaining airflow. Full removal to roof level is also available. We advise on the most appropriate option based on stack condition and position.
A full repoint and reflash on a standard stack typically takes one day from scaffold. Flaunching only takes half a day. We give a clear timeline in every quote.
No call-out fees. No obligation. Local roofer covering all of Wiltshire.
01249 247 076Last updated: August 2026