Specialist chimney repairs in Box — repointing, lead reflashing, flaunching and pot replacement. Lime mortar on historic stock. Free no-obligation quotes, no call-out fees.
All chimney repairs work across Box and surrounding Wiltshire — same local team, same standards, same guarantee as our Chippenham base.
Mortar raked out and replaced in correct specification — NHL lime on historic masonry, flexible mortar on modern brick. Four sides, full height. Scaffold included.
Get a quote →Step flashings, soakers, apron and back gutter replacement in code 4 or 5 lead. Correctly cut and dressed — not sealant over existing flashing.
Get a quote →Cracked flaunching (the mortar bed securing chimney pots) replaced in appropriate mortar. Pots inspected and replaced where broken.
Get a quote →Chimney pot replacement, cowl fitting and anti-bird guards. We match original pot profiles on period properties where appropriate.
Get a quote →Full chimney stack removal to roof level where the stack is redundant, structurally compromised, or creating maintenance problems. Slate or tile repair to close the opening.
Get a quote →Sudden flashing failure, structural stack movement, pot displacement. Emergency assessment same day — temporary make-safe applied, permanent repair scheduled.
Get a quote →The By Brook valley creates high humidity and heavy tree canopy — moss growth rates are among the fastest in our Wiltshire coverage, and lead corrosion is accelerated by valley moisture. For chimney repairs work in Box, this means specification choices that reflect the actual conditions rather than generic Wiltshire averages.
Bath stone AONB village with period cottages requiring lime mortar and matching stone materials throughout. We are 8 miles southwest from Box — 15 minutes — with no travel surcharge and same local knowledge that applies to every property type in this area.
Free quotes. No call-out fees. 15 minutes from Chippenham.
Chimney repairs on Box's Bath stone and Cotswold stone properties require lime mortar throughout — NHL 2.5 or 3.5 hydraulic lime, never cement. Lead flashing work uses code 4 or 5 as appropriate to the stack width and exposure. We carry both mortar types and lead codes for Box visits as standard.
The By Brook valley's moisture creates conditions for faster lead corrosion than on higher, drier ground. We recommend chimney inspection every 5 years on Box properties with original lead flashings — the valley moisture can halve the effective service life of under-specified leadwork.
"Chimney repointing and lead reflash — done correctly with appropriate mortar, no shortcuts. Dry since. Would recommend without hesitation."
"Flaunching replaced on both chimney pots — cracked and letting water into the stack. New flaunching, pots inspected and sound. Half a day from scaffold."
"Ridge tiles displaced at the chimney junction after a storm. Emergency call answered fast, on-site within 2 hours. Tiles replaced and repointed same day."
Chimney repoint: £300–£600. Lead reflash: £350–£700. Flaunching replacement: £200–£400. All include scaffold. Free written quote — call 01249 247 076.
Box is 8 miles southwest — 15 minutes. No travel surcharge. Emergency response available 24/7.
Depends on the masonry. Victorian and historic brick requires NHL hydraulic lime. Modern post-war brick uses flexible polymer-modified mortar. We assess and specify correctly — wrong mortar causes more damage than no repointing.
Yes — all chimney repointing, reflashing and flaunching work requires scaffold for safe access and quality of work. Scaffold cost is always included in our chimney quotes.
Visible open mortar joints, white salt staining, internal damp at the chimney breast, or tiles slipping at the chimney junction are all indicators. We offer free chimney surveys — many issues aren't visible from ground level.
Yes — ventilated caps prevent water ingress while maintaining airflow. Full removal to roof level is also available. We advise on the most appropriate option based on stack condition and position.
A full repoint and reflash on a standard stack typically takes one day from scaffold. Flaunching only takes half a day. We give a clear timeline in every quote.
No call-out fees. No obligation. Local roofer covering all of Wiltshire.
01249 247 076